субота, 25. новембар 2017.

Yellow lace

Hello friends..
I like this shirt most of the time and it is also very useful in business life :)

I used the molds of my Jacket Pattern again in my blouse ... Once you have this pattern, you can adapt it to everything. This is the reason why I have been working with jackets and shirts lately :) I once got out of the right clothes and made some small changes to my top clothes :)
I completed the collar in this shirt first and I added these extensions later on the shoulders. Because what I want is a multi-purpose extension that I can leave a droop when I want to do it. So after I finished my shirt, I fixed these extensions in my dick and shoulder

Such an image is formed when I attack the back of the ropes :)
If I want to connect from the front I want to height :)
In the meantime, as you can see in this photo, I made plenty of cuts in the arms and gave it a yellow rubbery wrinkle on the wrist. In the same way you can make your shirring under your shin rubber or it can be used in a shorter form with a curl in the work.

The back of my shirt :)

This is whether you want two ropes or a single rope release is a pose in front of the back air :) The aim is to explain in more detail what you can use in any way: D
I used to say that I made the arms using the same pattern, but the only difference here is that they cut the arms straight down rather than at a narrow angle. When you do this, you can make the molds in the circles. I chose to do it because I deal with lace fabric because the fabric is really delicate and I did not want to deal with the button or something :)

These are the parts you cut for the extra collar that is not in the mold. I closed it with these. I hope you like ......

среда, 22. новембар 2017.

In the Reds ...

Hi friends ... I finished the project I had planned for months and I was trying to do everything. But even if it is not completely exhausted I want to do it from scratch Of course, when I start to make a new jacket for months I try to find a different and detailed jacket. I did not go to sewing sieving, I did not go straight to my surgery, I wanted to fix it one by one, but when I said "I am sick" I planned to raise it to October 29th. Now I am always tired of seeing this jacket in my sewing room and YEEEEEEEE !!!!! I tried to come to the end of my lawyer, so I can not go into this detail again. I ended up preparing the image, but by killing me, I ended up saying both the rearview mirror and the back side in detail: I made a fancy detail to match the ends of the arms, but now I have not even seen the end of the difficulty, but I'm done. Even a subset of this jacket is difficult :) Finally we finished with mistakes (and seeing my mistakes for those who are jealous of what we did at this time :) relax :)). He would have pulled out of my head. Anyway the picture was added :)
And yes you see the red jacket on your side and the detail behind it ... You can see the bows as well because I seemed to be very empty when I did not,

When the jacket was about to burn me apart, I ended up eating seven seperately apart :) So it was a mistake on my peplum side. The reality is that the jacket has been turned into a torture again. The fact is: When I decided to make a pile detail on the back of the jacket, I said it would look nicer in a red case with another probe and I could not find a suitable red fabric in my red cloth but my room was fitted with felt. I had a thin fleece in my house with my husband and aaaaaann in a fabric again. I thought it was muuuuuuuu 'I think it would happen! I said 'and I tried to interrupt. I did not even want to go back after I stopped, and I had a dick knife or something. But I was aware of the minute of the first stitch. I forced both the machine and the folds in the floor parts very difficult because it felt thick. If you look at the pile parts, 6 layers of seams are also 8 layers of fabric and it is really hard to stitch. The only reason I did not think of the possibility of a machete was that I did not think that it would be possible to stop the casting from behind or from the back. Yes the posture was very nice, but the seven finished me ... It was very heavy, the jacket is really true :) Anyway, it is so unpleasant to dismiss it so I can not tell it is here :)

I wanted to do the pile detail on the jacket when it was over the jacket, and I made it straight and I finished it, and when I came to that part, I had mastered everything, but it took minutes for every minute but I do not do it :) The jacket has been crawling in the room for months :)

Here are the arms of the fight and the rear view. If you look at it from the back, I can not get it right when sewing the middle part of the pilings, and I'm too lazy to sew the skate again because of the collar. I am thankful that I have finished my work without breaking the machine: D This is a road with difficulties filled with mistakes and it is finally over. I would have liked to photograph and explain the stages of the production and now I swear I forgot how I made it :) Because I have always tried to fix the SENSE METHODS to fix it as I did it wrongly :) This is not the kind of thing that can be shown in many sewing rules, because I will not try the jacket for a long time :) :))

понедељак, 20. новембар 2017.

Black Long Jacket ...

Hello friends. I'm actually putting on a red jacket, but I took a break from it when I was too lazy to finish off the red rope, and at the same time I set up a black, long, short back long, sporty and classic jacket :)
Here is a short back-to-back long suit :)

I prefer to use a white belt while using a jacket, I like it very much :)

If you really want a long black arm, you can curl and make it a sport model.

The posture was also very nice, I made an oval cut because the front was short and long and it is very elegant furuyor :)
I use the collar on the jacket collar and I can close it whenever I want :) It was like the Japanese :) I will not be doing collar so soon I will be doing the bitch as I will explain below :)

This is the arched state :)

The arched and the thigh are closed off like thiseeeeee :)
I hope you will like it :)


Let me start explaining to tell :)
Yes, first of all, I put in molds and they are the molds that I have mentioned to you in my Jacket Pattern. You will understand that once you get the molds out you're done using it many times :)
I cut the back one piece but do not forget it in the middle so that it will sit in the back part of the waist later :) This model is not a collar as I mentioned in my article but I wanted to design a model so that it would be easy :) sewn from joints. If you forget to take your picture in the same way, you also cut and combine the arms. To make the jacket longer, you cut it according to the length you want. In order to make the long back short, I put on my clothes and set it according to him .. I fold the jacket right in the middle and make a curved cut so much :)

For the white folds on the corners, I cut half the arm from the same thickness and sew it in the arms and the fabric is tied manually to the liner to prevent it from slipping because it is a half arm. I have introduced a white and linen fabric because the linen looks more sporty in these designs. Because the cloth is black, I preferred white for the color that I used the most.

The arm is upside down. As you can see, it's a shiny fabric with fabric. I think that you can wash it on the machine because it is processed :) But it was a convenience that the glue sticks itself in itself :) To bend the edges, I had to open the sticks slightly from the edges and bend the inside and sew it from the sides again. I did not work with the back lining :)
I do not want you to be forced to slip while wearing a steady slip through a row of stitches in your arm so that you can not play inside the arm.

And the curled state will be like this :)
Later on, it was time to offer the opportunity to close the neck part of the jacket with the clips. Whether you use it in front of you, you can use it with a lot of constants :) So you have a lot of options :)
Whether it's sport or classical, modern but classic, indoor, but open, busty, but unobtrusive and so on :) What do you want? I say TRANSFORMERS I haha :)
I hope you like friends :)

недеља, 19. новембар 2017.

Jacket Pattern ....

Hello friends ... I wanted to share with you my caliber of jackets I made recently. Everyone keeps asking me which pattern I use, but as I said, I do not download and use it anywhere, and this pattern I prepared to tell you is also out of my jackets. I remember you and remembered how I was getting out of my writing in my Lace Caketim .... But the more questions I have about the moldings, the more I think the molds will give me the measurements, maybe the help ...
What you are going to do with the jacket or shirt above is the back part. The measurements are the same as I gave in the picture. I am dressed in 38-40 sizes and these are the measurements I usually use in seams. But when I put it on the cloth, I usually leave a few more stitches. Narrowing is easy, but impossible to add :) If you get plenty or if you have a pot on your back, you can collapse from the center of your back according to your body. So you will have a chance to sit on the belly. You may have gone to the pods on the shoulders. I often use this method of collapse, for example :)

This is the front of the jacket. If you turn this piece upside down, you'll cut the other side too. You see a jacket on that model. If there is collar, there will be some changes in the cut. The collar is added in the front middle section. you can find their models online. If necessary, you can also place your body in your body by punching under the chest.
This is the arm model I use. Jackets usually have two-part arm cuts, but since I sew lace, one piece is also suitable. But if you are dealing with thick fabrics, a single piece of arm will not look good. This model will be sufficient for thin fabrics. If you want ruffle details or movement in the shoulder part of the collar for this flat model ko, if you increase the height by 10 cm you can provide that movement ..

As I said in my article, it is totally connected to mathematical work and a little bit of frontal thinking. You should measure well and determine what you will do from the beginning. Sometimes my stitches are also inaccurate, and another way to draw my own short cuts I have a long bend I cut a long bell :) I do not know what I need some practical ideas. If you think it's complicated, it will be giant. I just need a little help, maybe. I'm trying to tell you the problem :)

Peplum and Winter Dress ...

Hello. Actually, I do not for a long time or it seems to me loooong long post written for granted :) Almost every day something stare attac...